Fabricated RTD (Pt100/Pt1000) Sensor with Standard Head and Process Connection
Fabricated RTD (Pt100 and Pt1000) Platinum Resistance Thermometers, available with a 6.0mm diameter 316 stainless steel probe.
Fabricated Pt100 and Pt1000 Platinum Resistance Thermometers, available with a 6.0mm diameter 316 stainless steel probe.
The sensor is terminated with an IP67 rated standard (heavy duty) die cast alloy terminal head which has a 20mm x 1.5mm (M20) cable entry. Inside the head is a ceramic terminal block which makes the connections to the extension cables very easy.
Supplied with a Simplex, 3-wire configuration. A 4~20mA transmitter can be mounted in the terminal head if required.
Supplied with a fixed process connection, positioned directly below the terminal head to allow mounting into the application.
Supplied with a rigid 316 Stainless Steel sheath. Where the design allows, the sensors are powder-filled to protect the element from damage caused by vibration.
Suitable for use between -75°C and +260°C.
Features
- Pt100 or Pt1000 sensor
- 6.0mm ∅ 316 stainless steel probe
- 1/2" BSPP process connection
- Simplex, 3-wire configuration
- Terminated with IP67 rated standard die cast alloy head (M20 cable entry)
- Suitable for use between -75°C and +260°C
| Product Extra Information |
Specification
|
|---|
-
Fabricated RTD (Pt100/Pt1000) Sensor with Standard HeadAs low as £36.84 £30.70 -
Fabricated RTD (Pt100/Pt1000) Sensor with Miniature HeadAs low as £33.00 £27.50
