RTD (Pt100/Pt1000) Hermetically Sealed Sensor
Hermetically sealed sensors offer a simple, easy to use solution for applications where the sensing junction needs to be protected from electrical interference or protected from moisture/liquids.
The PHS Hermetically sealed sensors offer a simple, easy to use solution for applications where the sensing junction needs to be protected from electrical interference or protected from moisture/liquids.
As standard the sensors are tested for electrical insulation at 1.0Kv. On request the sensors can be tested at higher voltages.
The PFA is temperature rated -100°C+260°C making it suitable for a wide range of applications. The insulation is easily cleaned and suitable for sterilisation.
The sensors are supplied with a 3-wire configuration, grade B element, and can be supplied with standard tails or a fitted miniature 3-pin RTD plug.
2 and 4-wire configurations are also available - contact sales for further information.
Features
- Pt100 or Pt1000 sensor, 3-wire configuration, grade B element
- 1m, 2m, 3m cable lengths available
- Hermetically Sealed Tip - simple & easy to use
- Suitable for insertion into liquids, including oil
- PFA Insulation, Oil & Chemical Resistant
- Suitable for use in temperatures ranging from -100°C to +260°C
- Electrically Insulated tip, 1.0Kv (can be tested at higher voltages)
- Flexible 7/0.2mm diameter 24 AWG conductor
- Available with standard tails or miniature RTD plug terminations
