Calibration
In-House Calibration / Testing Services
In addition to the in-house production of temperature sensors we offer a full range of Calibration and Testing Services.
Our In-house laboratory was initially introduced to test and verify the accuracy of the temperature sensors we manufacture. Due to high demand for our calibration services, our lab has been extensively expanded over the last 24 months to include the scope of pressure and humidity instrumentation. As of September 2021 we became UKAS accredited for temperature.
We offer an extensive range of very cost-effective calibration/testing services, normally with a quick 1-2 day turnaround. Please allow extra time when ordering a product that requires testing or calibration or testing.
Each product tested is provided with a unique serial number that is cross-referenced to the calibration report containing the test results.
Note: for in-house calibration/testing your invoice address will be used for certification.
Sensors and Instruments
- Resistance Thermometers (Pt100, Pt1000, Pt130)
- Thermocouples (Types K, J, T, N, E, R, S & B)
- Hand Held Temperature Indicators (with or without sensor connected)
- Temperature Transmitters (4~20mA, 0~10V etc.)
- Pressure Gauges
- Pressure Transmitters & Transducers (4~20mA, 0~10V etc.)
- Infrared Thermometers
- Temperature & Humidity Transmitters (4~20mA)
- Bi-Metal Analogue Dial Thermometers
- Temperature Controllers
- Humidity Sensors
- Data Loggers
- Sound
| Temperature | °C, °F, K | Temperature -90...+1200°C |
|---|---|---|
| Infrared Temperature (Black Body) +50...+500°C | ||
| Surface Temperature +50...+500°C | ||
| Temperature Simulation (Thermocouple, RTD & Resistance) | ||
| Pressure | psi, bar, kPa, atm, mbar, kg/cm², mmHg, inHg, inH2O, MPa | -0.8...15 bar: psi, bar, kPa, atm, mbar, kg/cm², mmHg, inHg, inH20 |
| 15...700 bar: psi, bar, kPa, MPa, atm, mbar, kg/cm², mmHg, inHg, inH20 | ||
| Voltage | mVdc, Vdc | Signal Voltage Simulation and Measurement: 0-10mV, 0-20mV, 0-1V, 0-5V, 0-10V |
| Current | mA | Current Simulation and Measurement: 0-20mA, 4-20mA |
| Humidity | %RH | Fixed point Salt Saturation Chambers, 33% and 75% |
| Environmental Chamber 10%...98% RH | ||
| Sound | db | 94 and 114 db |
Traceability
All of our test equipment is certified by independent UKAS (or national equivalent) accredited laboratories. Certificates are available on request.
UKAS Calibration
If you require a full UKAS certificate for your equipment please contact us to discuss.
Alternatively, view our Thermosense page for further information.