Dual Channel Thermocouple Data Logger with Graphic LCD Screen
- Buy 6 for £154.93 £129.11 each and save 4%
- Buy 11 for £148.48 £123.73 each and save 8%
Measures and stores over 250,000 temperature readings from two K, J or T type thermocouple inputs at a resolution of 0.1°C. The logger features a high-contrast graphic LCD and three-input buttons. Rugged and robust construction.
The HDT-GFX-DTC standalone USB data logger measures and stores up to 252,928 temperature readings from two K, J or T type thermocouple inputs at a resolution of 0.1°C. Using the free EasyLog USB software (available for download using the link below) users can quickly set up the data logger and view downloaded data by connecting the device to the PC's USB port using the supplied cable.
The data logger features a high-contrast graphic LCD and three-input buttons. This allows users to start, stop and restart the data logger using on-screen menus. This menu also provides real-time analysis of data either as a data summary (showing highest & lowest readings and alarm conditions) or as a graph that updates as new data is added. The Max and Min readings and also the Time and Date these are valid from, can be displayed on the LCD (info button). If desired, the user can then reset the Max/Min shown on this screen of the LCD. Each time these maxima and minima are reset whilst logging, an ""Event Marker"" is created in the data. When the data has been downloaded to a PC these Events can be viewed on the graph (Mark Events), they also appear in the data file - associated with the corresponding log when the reset took place. For certain applications where procedures mandate that a regular physical check of the logger / stats have taken place - this can be useful as an audit / validation tool. Multiple data logging sessions can be stored on the device ready for upload to a PC at a later date.
The two replaceable 1/2 AA batteries typically allow logging for up to one year.
The unit is supplied with a wall-mounting clip which also features two mounting holes and a magnet for quickly mounting the unit on a metallic surface.
Lascar Product Code: EL-GFX-DTC
Features
- Rugged and robust construction
- Dual channel, compatible with K, J and T type Thermocouples
- Logging rates between 2 seconds and 1 hour
- Stores over 250,000 readings
- On screen menu and graphing to start, stop, review and restart the logger in the field
- Micro USB interface for PC based set-up and data download
- Easy setup using free EasyLog USB PC software
- Immediate, delayed, push-button or temperature triggered start mode
- Graphic LCD shows real-time redings, graph and current status
- Resettable Min/Max readings may be viewed on the LCD
- User set audible alarm
- Highly visible confidence/alarm LEDs
- Supplied with user replaceable 1/2 AA batteries
- Supplied with a wall-mounting clip and magnet for metallic surfaces
| Product Extra Information | Specification
1 Above 999.9°C/F display becomes 1°C, internal resolution remains at 0.1°C/F. 2 Quoted accuracy is for data logger only when measuring within the specified operating temperature. Thermocouple error isn't included and should be considered. 4 At +25°C and 10 minute logging rate, with no alarm LEDs or sounder and minimal LCD use. |
|||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Free EasyLog USB software
The core of Lascar's USB data logging solution is the free software supplied with each USB data logger. Using a wizard format to guide the user through setup of the data logger and subsequent download of collected data, the software puts the 'easy' into EasyLog.
Compatible with Windows 10 and 11
