These metric-sized stainless steel heaters are manufactured using fine heater element wire, helically wound and supported in a ceramic support tube to give maximum heat transfer to the outer shell.
The extension cables are 1000mm long with nickel conductors which are fibreglass/PTFE insulated, rated to +350°C.
As the surface temperature of the heater can reach a maximum of +650°C, cartridge heaters should be mounted in a reamed hole for maximum surface-to-surface contact. A temperature sensor mounted close to the bottom 1/3 of the precision drilled or reamed hole will ensure excellent temperature control and heater life.
Sizes are metric. Imperial sizes also available.
Manufactured to give maximum heat transfer to outer shell
Fibreglass/PTFE insulated conductors (rated to +350°C)
+650°C maximum surface temperature
230V as standard, other voltages available
Imperial sizes also available
|Outside Diameter (OD)||16.0mm|
|Sheath Body and End Cap||Stainless Steel 300 series|
|Insulation||Ceramic former + pure magnesium oxide|
|Cable||1000mm extension lead, +350°C rated (Nickel Conductor/fibreglass/fibreglass silicone impregnated/PTFE impregnated)|
|Supply Voltage||230V AC Nominal (other voltages available)|
|Wattage||Nominal Wattage varies with voltage. W2=W1 (E2/E1)²|
|(W1 = rated wattage, W2 = actual wattage, E1 = rated voltage, E2 = supply voltage)|